SYD – Fine Furniture/Design

Tag: Pecan

  • Uchi Houston Host/Hostess Stand

    Uchi Houston Host/Hostess Stand

    host4

    I was approached by the company managing the highly acclaimed Uchi restaurants in Texas area for a revamp of the host and hostess stand there. The original one was made out of walnut plywood and it had been showing some wear and tear for awhile now. My clients wanted to use locally sourced spalted pecan to match the other furniture in the restaurant. 

    [singlepic id=268 w= h= float=center]

    I went to my favorite local sawmill Berdoll Sawmill in Cypress Creek, TX to get the spalted pecan. Spalted wood is beautiful, but it can be too busy if used without restraint. The front, sides, and the legs are spalted pecan, but everything else is made from hickory plywood to give it a nice contrast without the contrast being too stark. I allowed a expansion gap in the center of the front so the solid wood pecan could move freely without cracking. 

    [singlepic id=267 w= h= float=center]

    This new host stand was an opportunity to correct/add details that improved the functionality of the host stand. The first improvement was creating one of the legs hollow so the power cord can be discreetly fed through the cabinet and up to the top surface. Another improvement was creating a recessed area for the monitor to sit in. The clients wanted the customer’s first interaction with the friendly hosts and hostess to be unobstructed by distractions. The sides and the front is raised up front the top surface for this purpose- to hide any clutter that accumulates during a busy dinner service. 

    [singlepic id=266 w= h= float=center]

    In the cabinet, there are 3 doors, 1 drawer, and 1 cubby area. On the side, there is a little menu holder made out of spalted pecan. I chose a toned down board of spalted pecan for the menu holder so there’s a bit of a contrast. 

    [singlepic id=270 w= h= float=center]

    This was a fun project that meant a great deal to me. When I first moved to Austin and I was looking for a job, I worked as a prep chef there briefly until I could get my bearings in town and go work for a guitar maker. I recall my brief time there with warmth. The chefs and everyone there were extremely friendly and the buzz I felt during dinner service was intoxicating. I always wonder what would have happened if I stayed there instead of pursuing my woodworking career. 

     

  • Horn Jewelry Box

    Horn Jewelry Box

    hornbox5This client approached me about a jewelry box for his soon to be wife as a wedding gift. I’ve always loved the idea that I can create something meaningful for a couple on this special day. This object will be in some way linked as something that will remind them of this once in a lifetime moment. So, of course, I jumped on the project.

    [singlepic id=141 w=320 h=240 float=center]

    We talked about what designs he and his wife was into, and it became apparent that he wanted something simple, yet elegant. They also loved mid century designs as well as art deco so I wanted to tie elements of those in while creating something unique. The design we stumbled upon is layers of pecan and maple that is slightly different in size so it creates a staggered effect. The bevel on the edges bring this staggered effect to life while still maintaining the subtleness.For the top, I chose spalted maple since the tones were similar with the rest of the box and let’s face it, spalted lumber is just plain beautiful to look at.

    [singlepic id=139 w=320 h=240 float=center]

    There are four small drawers with removable dividers and a lift up lid that also houses removable dividers. The dividers fit into a beveled groove (birds mouth groove) so the thin divider sides are kept as strong as possible. To be able to lift the lid up, I notched out a little triangle- just enough for a finger to grab hold of the lid. I brought the triangle detail down to the rest of the pecan layers to keep everything balanced.

    [singlepic id=135 w=320 h=240 float=center]

    [singlepic id=133 w=320 h=240 float=center]

    The drawers needed a handle and I didn’t want to disturb the nice triangle feature, so I decided to cutout a finger hole on the side that allows for the drawers to be opened easily. I think it’s interesting to be able see the maple drawer sides through the cutout and see the movement of the cutout as the drawer is being opened.

    [singlepic id=140 w=320 h=240 float=center][singlepic id=134 w=320 h=240 float=center]

  • Tambour sideboard

    Tambour sideboard

    sideboard9

    I was approached to design a credenza/sideboard that matches a conference table I made in the past. A+L Conference Table. The main purpose for the sideboard was a storage unit that housed all their conferencing equipment when they weren’t using it as well as all the wires and misc things that should be hidden when it’s not used. The sideboard also makes a great platform to showcase all the awards they have won in the past.

    [singlepic id=124 w=320 h=240 float=center]

    Since there wasn’t a whole lot of space between the wall and the conference table chairs, I wanted to avoid having a door that swings out- especially if they needed the cabinet open for one reason or another. That left me with sliding doors or tambour doors as the options for the doors. Tambours are doors that slide in a track and roll so that it’s able to tuck into the sides and hide behind the back panel. You see this used on roll top desks.

    [singlepic id=127 w=320 h=240 float=center]

    After our design meeting, the client and I both agreed that tambours were the better choice for this situation. Not only does it look nicer, it’s a better solution functionally since you can reveal just the center shelf area, or open it all the way to showcase the whole interior of the cabinet. I also believe tambours have a certain nostalgic feeling that reminds us of beautiful furniture of the past.

    [singlepic id=130 w=320 h=240 float=center]

    The design inspiration came from mid-century modern furniture. I think the simplicity in form of the designers of this era got it just right. It’s hard to improve upon it, so I left the lines as clean as possible and tried to let all the details shine. Like many of SYD furniture, the eye is in the detail and the craftsmanship. Spend time on those elements and you don’t need fancy or unusual forms to stand out.

    [singlepic id=125 w=320 h=240 float=center]

    Most of the furniture in the room is made of pecan, so pecan was the natural choice of wood for this project. We didn’t want the room to look like a forest of pecan, so we decided to make the tambour doors out of a different, but complimentary wood. In this case, we decided on teak. The warm color of teak and the rich grain makes the door the focal point without taking all of the spotlight.

    [singlepic id=129 w=320 h=240 float=center]